Auto Verdi 3-Stage Billet GT3 Oil Pump

These billet oil pumps come pre-clearanced for most connecting rods and longer stroke crankshafts. The version with 30mm high volume pressure side gears are designed for all aircooled street and race engines as an upgrade to the factory Porsche GT3 oil pump. 32mm / 34mm high volume pressure side gears are intended for motorsport use.

Auto Verdi dry sump oil pumps offer more than just enough oil flow and pressure to your race engine. With lower internal friction losses they take less power away from your engine to run at maximum horsepower. The free hp and best available vacuum give your engine every advantage. Dyno tests have proven 3-6 hp gains on a well-sealed race engines still maintaining oil pump performance. Housings and scavenge rotors are made of aerospace grade aluminum alloy. The material allows for very tight machining tolerances without distortion under maximum loads. The aluminum parts are anodized before PTFE-coating to make for beter adhesion. Pressure gears are made of steel, the same spec as transmission / gearbox gears. They are very hard and precision ground to withstand long cycle periods. A Balanit C coating is also applied for minimum friction.

Scavenge sizes are 30mm and 35mm on the 3-stage version with 2 lobe rotors.

Available in three pressure side gear sizes, 30mm, 32mm or 34mm

Pump weighs 7.5 lbs / 3.4kg

**Note: Case modification/clearancing may be required depending on what engine case is being used, same as with factory gt3 oil pumps**

See attachment here for a guide to modifying your case.

Free UK postage on all our products! We can ship this item worldwide (excluding North America) for £20.